Skip to content

Kit HD Nitro Seal

  • HD NITRO SEAL is a co-polymer paint sealant. Make sure that the car is properly prepared by cleaning it and removing any scratches on the surface underneath.
  • Wipe it down with rubbing alcohol then clean up any wax or existing contaminants that may be on the paint. HD NITRO SEAL extremely simple product to apply.
  • We labelled it with black to go with the black pad is part “A” Red to go to Red pad is part “B"

  • using very little, typically one these cans will do two cars entirely. Apply three small quick dabs and apply in even directions by hand or with a polisher.

  • Wait about 10 to 15 minutes for the product to flash on the surface; it’s going to haze over, let it completely flash.

  • Do the entire vehicle then come back. Start again with part B. Put 3 small drops onto the red pad from the red bottle and rub on the surface. With the “B” product, you can apply it in kind of a massaging or buffing motion.
  • The most important part about this is application is complete coverage.

  • What the part B does is it brings out the shine and the depth that part “A” can’t do. Don’t be afraid to apply it to the plastics, the trim, the grill, or even on glass and headlights.
  • It’s not going to cause any issues, if anything it will coat and protect those parts longer.

  • HD NITRO SEAL is intended to cover the entire body and seal the entire surface. All we have to do from this point on is wait one hour before removing the haze.
  • We want to wait for this to cure, afterwards we can remove it with the microfiber towel that came in your package.

  • What you will notice when it rains is superior paint protection. You will get “sheeting” not necessarily “water beading”

  • The water isn’t going to sit on the surface. It’s going to start to fall off the first time it rains outside. You’ll be driving, make a turn, and the water will just slide right off the surface.

  • Don’t get the surface wet for 24 hours right after you apply HD Nitro Seal because the two elements are still bonding with one another and providing the best protection.

  • So the longer that you allow the surface to remain dry without getting wet the better your paint protection will be and a longer-lasting paint sealant will be created.
  • No need for endless manuals, polishers, or equipment.

Kit Contains:

– 1 HD Nitro Seal Part A
– 1 HD Nitro Seal Part B
– 1 Red Applicator
– 1 Black Applicator
– 1 Microfiber Towel
– 1 Latex Glove
– 1 Instruction Sheet
– 1 Nitro Seal Box.

  • WARNING: This product can expose you
  • to chemicals including Ethylbenzene which is known to the State of
  • California to cause cancer. For more information go to
Product Information & SDS Sheets